Trenchless Sewer Repair: What It Is And How It Works For Your Home?

One of the biggest headaches for any homeowner is when the sewer line or pipe bursts. It is very disruptive, and it can easily take a day from your life, and the foul odor and invasive water in the yard is something no one wants to see in their lifetime. The process of sewer repair is costly and time-consuming. There are many methods of sewer repair which can be done by the plumbers Dubois, but in this article, we will learn about the trenchless process of sewer repair.

Keep reading further, we will discuss why many plumbers recommend the trenchless sewer repair method and why it is the best way. Further down, we will discuss some of the methods plumbers will be implementing to ensure you have your sewer repaired with the trenchless method.

What is Trenchless Sewer repair?

Trenchless sewer repair, as the name suggests, is a way of repairing the sewer without trenching. With this method, plumbers can replace the sewer pipe without trenching. There are many benefits of trenchless sewer repair. However, one thing to note is that it is not always possible to go for trenchless sewer repair as in many cases, trenchless sewer repair has no scope, but in many cases, it is a preferred method. Trenching is not done in a trenchless sewer repair, so the cost of repair becomes less expensive and more affordable, less intrusive, and not even time-consuming.

What are the different types of trenchless sewer repair, and how is it done?

Pipe Bursting:

Pipe Bursting is a unique method of trenchless sewer repair where the old pipe is burst from within, and a new pipe is installed simultaneously. The plumbers pass a prominent head-like structure called a ‘bursting head or bullet.’ The bursting head will have a dimension more famous than the pipe.

The bursting head is passed through the old pipe, and due to the higher diameter of the bursting head, the old pipe is burst and destroyed, and a new pipe is being laid behind at the same time. This is unique in its approach, and you need to hire competent plumbers for this job.

Cured In Place Pipe (CIPP):

Cured in place, which is also referred to as the CIPP method. It is a technical term for slip lining, in this method of trenchless sewer repair. In this method, a saturated resin liner is inserted into the existing pipe, which is rendered in place by heating the liner.

Slip Lining:

Slip lining is also a process of trenchless sewer repair technique in which an epoxy liner is installed by the plumbers Altoona inside the existing pipe. The old pipe is broken but using the volume of the old pipe, basically, a new pipe is created. It is like a pipe within a pipe.

This is a unique method, which is significantly less time-consuming, and the downside, which is not that bad, is the decrease in diameter. The diameter of the new pipe is decreased so that the water may appear under slightly more pressure. It is also to note that some district authorities do not authorize this repair method.

How to choose the best method of trenchless sewer repair?

The right and direct answer are that the right choice depends on the location and the condition of the sewage leakage. However, for the information, pipe busting is the most popular trenchless sewer repair method. There is a variety of reasons behind the statement. The first thing is the environmental impact of the pipe bursting method. This method is environmentally friendly and the least impactful if we compare it with a few other trenchless sewer repair methods.

Studies have shown that the CIPP Projects release a harmful chemical called Styrene. It is a hazardous chemical. The pipe bursting method is affordable, and it is very environmentally friendly. Unlike the CIPP projects, dangerous chemicals are not needed in this method.
If you have a sewer problem and you need any sewer expert, professional and licensed plumbers can do the job for you.

Leave a Reply

Your email address will not be published. Required fields are marked *